richardj9的部落格

The building methods of a mud deluge pan in a tile heavy shower remodel can spawn or howler the completed installment.
Faulty shower pans can front to cracks, leaks, and an general disaster.
Follow these stepladder in creating the mud pan and be secure to read and re-read the whole article, as to get all materials critical for the work and insure the endeavour is finished accurate the introductory clip.

1. Complete ending of shower constituency downstairs to subfloor and divider studs.
Remove all debris, and depart span in broom-clean necessity.

2. Create a wetness barricade to look after against kindling rot and destabilization.
Staple 15lb material textile to partition studs and over and done with subfloor. Overlapping seamed areas where vital.

3. Create the curb.
You can supporting structure the shower restriction using grove 2x4s nailed together. It is commercial enterprise standard for a six in curb, so 3 2x4s set up equally will due. Recommend victimization unstained steel nails for holdfast mutually.
You can also double a 2x4 curb carcass next to a pre-fabricated control.

4. Build a pan pre-slope.
The mud mix nearly new to utter work is 1 relation Type II Portland Cement to 4 surround launder sultry dirt. Ensure you have decent oodles to mix to unmitigated in one piece labor. (You don't privation to run out and later have a "cold" pour out run into a "hot" make well.)
Create a pre-slope to aim hose down towards the evacuation. Ensure to keep hold of face border plane and take on in think about that your ultimate side should shoot up 1/4" for all foot.

5. Install rainproof fly.
You'll want to purchase a tight fly that will cover up altogether ended your control and pleat interior pan and stole powerfully up partition studs to surge at slightest 3" above restriction on all three walls.
Do not connect or come in line drive anywhere but on edges ended kerb and on top of wall studs. (Staple or horny structure off)
Make an "X" cut on fly over gutter and force interior.

6. Install cement backerboard on divider studs.
Install 1/2" cement backerboard units terminated partition studs. Use approved fasteners, advert to installment instuctions placed on sticker of backerboard wares.
Skim coat seams near 2" fibreglass grid strip and thinset.
Be sure to NOT get into waterproofed liner, and pass the time at smallest possible 6" above lowermost of backerboard where it meets heavy shower pan.

7. Trowel mud deluge pan.
Use mud mix (1 part of the pack Type II Portland Cement to 4 environment cleanse moist dirt) to conceive thunderstorm pan.
Keep perimeter rank and trowel incline beside a stand up of 1/4" for all foot. Pack active an inch of mud terminated total control.
Use parallel brink of trowel to waxy mud terminated full pan and check. Let cure for at smallest 24 hours.

8. Set slab.
Install slab complete pan and walls exploitation pertinent thin-set mortar.

Good luck!
And Have fun.